Crown Royal Stoves RS7200E, Руководство пользователя, Страница: 5 / 53

Greentech Manufacturing would like to thank you for your recent purchase of a Crown Royal Stove. We sincerely
appreciate the trust you have placed in us and we look forward to continuing to serve you. We know that you will be
pleased with our continued commitment to your satisfaction while you enjoy the benefits of heating with a Crown Royal
Stove. Crown Royal Stoves are manufactured with quality workmanship and designed to offer you value now and years
to come. We are so confident in the quality of our furnace each Crown Royal Stove comes with a 20 year limited
warranty.
To ensure maximum benefits from your furnace, read complete manual prior to using or installing your furnace.
Always keep this manual for future references.
Crown Royal Stoves – Outdoor EPA Qualified White Tag Wood Furnace
U.S. Environmental Protection Agency Certified to comply with 2015 particulate emission standards. Not approved for
sale after May 15, 2020. The Model RS7200E was tested to EPA Method 28WHH for wood fired hydronic heating
appliances using crib fuel. The appliance had particulate emissions of 0.13 Lbs/Million BTU.
The outdoor series furnaces are designed to be located next to your firewood storage for convenience and is normally
filled once or twice a day, depending on the temperature outside. Our outdoor series furnaces are often used to heat
residential home, garages, shops, barns, businesses, greenhouses, swimming pools, spas, domestic hot water, radiant in-
floor heat, and snow melt applications.
Model RS7200E
Estimated Btu’s* 125,000 btu’s
Heating Capacity** 2,000 – 3,000 sq ft
Dimensions (L X W X H) 66- 1/2” X 47” X 70” plus chimney length
Weight 1752 lbs
Firebox Length 27”
Wood Load Capacity 24”
Chimney Size 6”
Firebox Door Size (L X H) 18” x 18”
Supply/Return Size 1- 1/4”
Water Capacity 190 Gallons
Electrical Rating 115 VAC/60HZ/1 PH
*Btu’s are estimated and will vary with the type of wood burned.
**Ensure to properly size unit to buildings thermal demands.
Crown Royal High Efficiency Wood Gasification Furnaces are designed to burn only clean, dry wood. Clean wood means
wood that has no paint, stains, or other type of coatings and wood that has not been treated with preservatives,
including but not limited to, copper chromium arsenate, creosote or pentachlorophenol. Wood must be cured between
6-9 months and dried to 20% moisture or less.
Warranty will be voided if the furnace is used to burn materials for which the unit is not certified by the EPA and void
if not operated according to the owner’s manual. Burning any other material other than “Clean, Dry Wood” will VOID
warranty.
For Outdoor Use Only!
This wood heater needs periodic inspection and repair for proper operation. It is against federal regulations to
operate this wood heater in a manner inconsistent with operating instructing in this manual.
INTRODUCTION
5