Crowcon Detective Net Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 40

Crowcon Detective Net Скачать руководство пользователя страница 6

6

Safety Information

•

Detective Net is a hazardous area certified product and as such must be operated and

maintained in strict accordance with the instructions, warnings and label information included in

this manual. Detective Net must be operated within the limitations stated.

•  This document is applicable to Detective Net 433 and Detective Net 868.
•  Read and understand all instructions in this manual prior to use.
•  Before use ensure that the equipment is in good condition and that the enclosure is intact has

not been damaged in any way.

•

If there is any damage to the equipment do not use, contact your local Crowcon office or agent

for repair/replacement

• There are no user replaceable internal parts and only Crowcon or Crowcon agent service

personnel can service this product.

• Only genuine Crowcon replacement parts must be used; substitute components may impair

intrinsic safety and invalidate safety certification and warranty of Detective Net.

• Detective Net has a non-rechargeable battery that must only be changed in non-hazardous

(safe) areas by Crowcon or Crowcon agent service personnel

•  No live maintenance is permissible
•  Observe all warnings and instructions marked on the unit and within this manual.
•  If this product is not working properly, read the troubleshooting guide and/or contact your local

Crowcon office or agent, for details reference the ‘Crowcon Contacts’ section of the manual

•

Risk of static discharge. During installation in a fixed location take care to avoid static

generating mechanism. Once installed do not touch certification label on rear of device if a

flammable hazard is present.

• The metal connector shell has a capacitance of 7 pF when measured in accordance with IEC/

EN60079-0. Installations where the resistance to earth of this exposed metal surface is greater

than 1G Ω must consider the potential electro-static charge risk (e.g. in accordance with CLC/

TR 50404 or other relevant publications).

• Detective Net should be used with one of the following interconnection cables, Crowcon part

number E070010, E070012 & E070028, having the following parameters: Cmax = 15 nF/m;

Lmax = 75 uH/m, Rmin = 30 mΩ/m.

Contents

Exit

Overview

Operation

Specification

Service and

maintenance

Troubleshooting

Warranty

Glossary

Contacts

Accessories

«
...
4
5
6
7
8
...
»

Содержание Detective Net









































Отзывы:

Нет отзывов