manualshive.com logo in svg

Crowcon Detective Net, Руководство пользователя и оператора, Страница: 18 / 40

Поделиться
Скачать
Crowcon Detective Net Скачать руководство пользователя страница 18

18

1.6.3 

Toggle Devices between Master & Slave Functionality

Each network requires only one master device; all other devices should be slave devices. One unit 

in the network should be configured as a master device and all other units should be configured as 

slave devices.

 

X

To toggle between master and slave functionality press 

FB2

 for 3 seconds.

 

X

If the device was a slave device and is being toggled to a master device LED4 will flash 3 times 

indicating a successful toggle from a slave to a master.

 

X

LED1 will then continue to flash red and LED4 will continue to flash green indicating the device is 

configured as a master device. 

 

X

If the device was a master device and is being toggled from a master to a slave device LED1 will 

flash 3 times indicating a successful toggle from a master to slave.

 

X

LED1 will then continue to flash red indicating the device is configured as a slave device.

1.6.4 

Setting Up a Simple Wireless Network

 

X

Take a device configured as the master device ensuring it has been reset (see 

Section 1.6.2

) and 

double-click 

FB2

 to enter learn mode.

 

X

LED1 will continuously flash red, to indicate device is in the learn mode and LED4 will continue to 

flash green.

 

X

Take a device configured as a slave device ensuring it has been reset (see 

Section 1.6.2

) and 

place a minimum of 1m apart from the master device.

 i

The slave and master devices must be placed a minimum of 1m apart to ensure correct 

operation during normal operation and also when setting up the paired network.

 

X

Double-click 

FB2

 on the slave device to enter learn mode LED1 will continuously flash red to 

indicate the device is in learn mode.

 

X

The slave device will learn automatically and when complete, LED1 turns off and LED2 will flash 

green to indicate the slave is connected to the master.

 

X

If the learn process is unsuccessful, the slave device will indicate this as LED2 will flash red 3 

times to show an unsuccessful learn and LED1 will revert to flashing red to show powered up. 

The slave will exit learn mode.

 

X

If the device had previously been connected to a network, LED2 would revert back to its previous 

state and LED1 would remain off.

 

X

The master device will indicate a successful learn of a slave device by a triple green flash on 

LED2 (this will only occur once) and LED1 remains continuously flashing red, indicating the 

device is still in the learn mode. LED4 continues to flash green indicating its master status.

Contents

Exit

Overview

Operation

Specification

Service and 

maintenance

Troubleshooting

Warranty

Glossary

Contacts

Accessories

Содержание Detective Net









































Отзывы:

Нет отзывов