Crowcon Detective Net Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 40

Crowcon Detective Net Скачать руководство пользователя страница 21

21

X

The slave will unlearn automatically and leave the network, if the slave successfully leaves the

network LED2 will flash green 3 times to indicate successful unlearn then will be extinguished to

show device no longer on the network. LED1 flashes red to show device is powered.

X

If the unlearn process is unsuccessful, the slave device will indicate this as LED2 will flash red

3 times to show an unsuccessful unlearn then LED2 will revert would revert back to its previous

state prior to the unlearn process. The slave will exit unlearn mode and be maintained in the

network.

X

The master device will indicate successful unlearn of a slave device by a triple green flash on

LED2 (this will only occur once) and LED1 remains continuously flashing red, indicating the

device is still in the learn mode. LED4 continues to flash green indicating its master status.

X

Double-click

FB2

on master device to exit Learn mode. LED4 continues to flash green, LED2 will

flash green to show the slave is connected to the network and LED1 turns off.

i

It is important to ensure the master device exits learn mode or the network will not

operate correctly.

X

The slave is now removed from the network.

1.6.8 Power Down master or slave device

When the wireless network is decommissioned to preserve battery life the master and slave devices

should be powered down.

X

Hold down both

FB1

&

FB2

for 3 seconds to power down.

X

LED’s will flash right to left to indicate a power down sequence.

1.6.9

Powering Up a Previously configured network

If a network of configured and learned wireless devices are powered down, upon the devices being

powered up again the devices will remember the previous configuration, i.e. if they were previously

configured as a master or slave.

It is not necessary to reconfigure the network.

The deployment instructions on

should then be followed.

Contents

Exit

Overview

Operation

Specification

Service and

maintenance

Troubleshooting

Warranty

Glossary

Contacts

Accessories

«
...
19
20
21
22
23
...
»

Содержание Detective Net









































Отзывы:

Нет отзывов