Crowcon Detective Net Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 40

Crowcon Detective Net Скачать руководство пользователя страница 20

20

1.6.6

Adding additional slave devices to the network

Once a network has been configured further slaves can be added to the network at any time:

X

On the master device, double-click

FB2

to enter learn mode.

X

Take a device configured as a slave device ensuring it has been reset (see

Section 1.6.2

switch on and place a minimum of 1m apart from the master device, then double-click

FB2

to enter learn

mode, LED1 will continuously flash red to indicate the device is in learn mode.

X

The slave will learn automatically and when complete, LED1 turns off and LED2 changes to a

single green flash (network OK).

X

The master device will indicate a successful learn of a slave device by a triple green flash on

LED2 (this will only occur once) and LED1 remains continuously flashing red, indicating the

device is still in the learn mode. LED4 continues to flash green indicating its master status.

X

The slave is now configured to the network.

X

To add further slave devices repeat the above process until all required slaves are configured to

the network.

X

If no further slaves are to be added to the network double-click

FB2

button on the master device

to exit learn mode, LED4 continues to flash green, LED2 will single flash green to show the slave

is connected to the network and LED1 turns off.

i

It is important to undertake a network connection test if slaves are added to the network.

This ensures all devices are functioning and correctly connected to the network.

1.6.7

Removing Slave Devices from the Network

Once a network has been configured if a slave device is to be removed from the network as it is no

longer required, this must be ‘unlearned’ from the network to prevent the network indicating a fault.

If a slave device is removed from a network to which it was previously learned, the master will

indicate a fault by illuminating LED2 .To prevent this, a slave must be unlearned from the network.

X

Take the device configured as the master device and double-click

FB2

to enter learn mode.

X

LED1 will continuously flash red, to indicate device is in the learn mode and LED4 will continue to

flash green indicating master status.

X

Take the slave device to be removed from the network and double-click

FB1

to enter unlearn

mode, LED1 will flash red continuously, to indicate it is in unlearn mode.

Contents

Exit

Overview

Operation

Specification

Service and

maintenance

Troubleshooting

Warranty

Glossary

Contacts

Accessories

«
...
18
19
20
21
22
...
»

Содержание Detective Net









































Отзывы:

Нет отзывов