Crossfire PC 375, Руководство пользователя

Страница: 4 / 17

Page of 15 2
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed
below may result in serious injury.
CAUTION:
Do not allow persons to operate or assemble this Plasma 375 unless they
have read this manual and have developed a thorough understanding of how the Plasma 375
works.
WARNING:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur.
It must be
understood by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY CONSIDERATIONS
1.1 Your Welding/Cutting Environment
-Keep the environment that you will be welding/cutting in free from flammable materials.
-Always keep a fire extinguisher within reach.
-Always have a qualified person install and operate this equipment.
-Make sure the area is clean, dry and well ventilated. Do not operate the plasma cutter in humid, wet
or poorly ventilated areas.
-Always have your plasma cutter maintained by a qualified technician in accordance with local, state
and national codes.
-Always be aware of your work environment. Be sure to keep other people, especially children, away
from you while you are cutting.
-Keep harmful arc rays shielded from the view of others.
-Mount the plasma cutter on a secure bench or cart that will keep the welder secure and prevent it
from tipping over or falling.
1.2 Your Plasma Cutter’s Condition
-Check all cables, power cord and torch to be sure the insulation is not damaged. Always replace or
repair damaged components before using the plasma cutter.
-Check all components to ensure they are clean and in good operating condition before use.