Crossfire PC 375, Руководство пользователя

Страница: 7 / 17

Page of 15 5
plugs to keep sparks out of ears and hair.
Electromagnetic Field
Electromagnetic fields can interfere with various electrical and electronic
devices such as pacemakers.
-Consult your doctor before using any plasma cutting device
-Keep people with pacemakers away from your plasma cutting area while cutting.
-Do not wrap cable around your body while plasma cutting.
- Wrap plasma torch cable and ground cable together whenever possible.
- Keep plasma torch and ground cables on the same side of your body.
Shielding Gas Cylinder Can Explode
High-pressure cylinders can explode if damaged, so treat them carefully.
-Never expose cylinders to high heat, sparks, open flames, mechanical
shocks or arcs
-Do not touch cylinder with plasma torch.
-Do not plasma cut on the cylinder.
-Always secure cylinder upright to a cart or stationary object
-Keep cylinders away from welding/cutting or electrical circuits.
-Use the proper regulators, gas hose and fittings for the specific application
Proper Care, Repair and Maintenance
Always have power disconnected when working on internal
components.
-Do not touch or handle PC board without being grounded with a wrist strap. Put PC board in static
proof bag to move or ship.
-Do not put hands or fingers near moving parts such as drive or fan.
Proposition 65 Warnings
Plasma cutting equipment produces fumes or gases which contain chemicals
known to the state of California to cause birth defects and, in some cases, cancer.
(California Health & Safety code section 25249.5 et seq.)
PC 375 USE AND CARE
•
Do not modify the PC 375 in any way.
Unauthorized modification may impair the function
and/or safety and could affect the life of the equipment. There are specific applications for which
the
PC 375
was designed.
•
Always check of damaged or worn out parts before using the PC 375.
Broken parts will affect
the
PC 375
operation. Replace or repair damaged or worn parts immediately.
•
Store idle PC 375.
When
PC 375
is notin use, store it in a secure place out of the reach of
children. Inspect it for good working condition prior to storage and before re-use.