Crossfire 1000GTR, Руководство по обслуживанию, Страница: 192 / 266

- 78-
ENGINE
- 178 -
1
、
CHECK
1). Checking the shift forks
• shift fork follower
①
• shift fork pawl
②
coring en s wear amage Replace.
• gui e ar
Roll the gui e ar on a flat surface.
Bends
Replace.
WARNING
Do not attempt to straighten a bent guide
bar.
• shift fork mo ement
on the gui e ar
Unsmooth operation Replace the shift fork
an the gui e ar.
• springs
Cracks amage Replace.
. Checking the shift rum
• shift rum groo es
cratches wear amage Replace.
ENGINE
- 179 -
3). Checking the bearings
(1) Check:
• earings
Clean and lubricate, then rotate the inner race
with a finger.
Roughness Replace
4). Checking the oil pump
• rotor housing
• rotor co er
Cracks/wear/damage Replace.
• oil pump operation
Unsmooth Repeat steps #1 and #2 or
replace the efecti e parts.
2
、
Measure:
1). Measure the oil pump
• tip clearance a
(between the inner rotor and the out rotor
)
• si e clearance
(between the outer rotor and the pump
housing )
• o y clearance c
(between the outer rotor and the pump
housing )
Out of specification Replace the oil pump.
Tip clearance Limit: 0.23 mm
Side clearance Limit: 0.25 mm
Body clearance Limit: 0.20 mm