M&C Commands (continued)
Range: -100 to +200 (-10.0 to +20.0 in 1 dB steps)
xxxx = 4 characters
where:
{aaCGxxxx}
Set Gain
where
{aaCMx}
Set Mute
x = 3 to select Auto 10 MHz reference
x = 2 to select External 10 MHz reference
x = 1 to select Internal 10 MHz reference
x = 1 to mute the output
x = 0 to unmute the output
xx = 2 characters
where:
{aaCEx}
Set 10 MHz reference mode
Range: +2000 to -2000
xxxxx = 5 characters
where:
{aaCOxxxxx}
Set Int. 10 MHz reference offset
Range: 00 to 31
where:
{aaCRxx}
Set RS485 address
x = 2 to select RS485
x = 1 to select RS422
x = 0 to select RS232
where:
{aaC
I
x}
Set Serial Interface
Description
Syntax
Command
Table 2.0: Model 4116-T300 M&C Commands
4116-T300 Manual_F
Page 8
11/05/15
