2.2 M&C Commands
The following tables summarize the commands and status queries applicable to the 4116-T300.
* PLEASE NOTE:
The two character {aa} prefix, shown in the following table, is present ONLY when RS485 is selected.
Table 2.0 Model 4116-T300 M&C Commands
if Band 11 is selected, Range: -300 to +200 in 5 MHz steps
if Band 10 is selected, Range: -300 to 300 in 5 MHz steps
if Band 9 is selected, Range: 0 to 0 (not tunable)
if Band 8 is selected, Range: -1000 to +500 in 5 MHz steps
if Band 7 is selected, Range: 0 to +1000 in 5 MHz steps
if Band 6 is selected, Range: -1000 to 0 in 5 MHz steps
if Band 5 is selected, Range: -1000 to +900 in 5 MHz steps
if Band 4 is selected, Range: -500 to +1000 in 5 MHz steps
if Band 3 is selected, Range: -500 to +1000 in 5 MHz steps
if Band 2 is selected, Range: -600 to +1000 in 5 MHz steps
if Band 1 is selected, Range: -500 to +1000 in 5 MHz steps
yyyyy = Translation Frequency Offset
xx = Band (Range 1 to 11)
where:
{aaCxx yyyy}
Set Frequency Offset
x = 11 to select band 11: in = (30.0 to 31.0 GHz)
Out = (19.2 to 20.2 GHz)
x = 10 to select band 10: in = (29.0 to 30.0 GHz)
Out = (18.3 to 19.3 GHz)
x = 9 to select band 9: in = (29.0 to 30.0 GHz)
Out = (17.7 to 18.7 GHz)
x = 8 to select band 8: in = (28.0 to 29.0 GHz)
Out = (19.2 to 20.2 GHz)
x = 7 to select band 7: in = (28.0 to 29.0 GHz)
Out = (17.7 to 18.7 GHz)
x = 6 to select band 6: in = (27.5 to 28.5 GHz)
Out = (19.2 to 20.2 GHz)
x = 5 to select band 5: in = (27.5 to 28.5 GHz)
Out = (18.3 to 19.3 GHz)
{aaCBx}
Set Frequency Band
x = 1 to select band 1: in = (27.5 to 28.5 GHz)
out = (17.7 to 18.7 GHz)
x = 4 to select band 4: in = (30.0 to 31.0 GHz)
out = (20.2 to 21.2 MHz)
x = 3 to select band 3: in = (29.0 to 30.0 GHz)
out = (19.2 to 20.2 GHz)
x = 2 to select band 2: in = (28.0 to 29.0 GHz)
out = (18.3 to 19.3 GHz)
Description
Syntax
Command
Table 2.0: Model 4116-T300 M&C Commands
continued on page 8...
4116-T300 Manual_F
Page 7
11/05/15
