Cross Technologies 1582-14, Инструкция по эксплуатации

Страница: 6 / 12

2.3 Front Panel Controls and Indicators - The following are the front panel controls and indicators.
SWITCH A
POWER
1 2
AUTO
ON-
LINE
MANUAL
SELECT
REM ON-
LINE ALM
CH 1
CH 2
ALM
MAN
RESET
SWITCH B
AUTO
ON-
LINE
MANUAL
SELECT
REM ON-
LINE ALM
CH 1
CH 2
ALM
MAN
RESET
FIGURE 2.2 1582-14 Front Panel Controls and Indicators
TABLE 2.1 Front Panel Controls and Indicators
For SWITCH A and SWITCH H For SWITCH A and SWITCH B
Item
Description
CH1 ON-LINE LED Turns green when Channel 1 is selected
CH2 ON-LINE LED Turns green when Channel 2 is selected
MANUAL LED Turns red when the MANUAL SELECT switch manually selects Channel 1 or 2
ALARM CH1 LED Turns red when Channel 1 clock times out or on external alarm input
ALARM CH2 LED Turns red when Channel 2 clock times out or on external alarm input
REMOTE LED Turns amber when REMOTE control is active
MANUAL SELECT Switch* 3-position switch as follows:
• LEFT - manually select Channel 1
• CENTER - AUTO - switch position determined by alarm and remote closures
• RIGHT - manually select Channel 2
Switch RESET Resets switch to Channel 1 if it is good and switch is in the latch mode
Also resets REMOTE selection to normal AUTO operation
Common for the Chassis Common for the Chassis
Item
Description
POWER 1 LED Turns green when power is applied to AC1 input on the rear panel
POWER 2 LED Turns green when power is applied to AC2 input on the rear panel
*If operating in the ICS mode, the last channel manually selected (CH1 or CH2) will be the intiial
channel when MANUAL switch is returned to AUTO if both channel alarms are clear or both channels
are in alarm.
1582-14 Manual_A Page 6 06/22/09