3
FITTING OF A PLUG - FOR U.K. AND IRELAND ONLY
This appliance must be earthed.
If the plug is not suitable for the socket outlets in your home, it can be removed and replaced by a
plug of the correct type.
If the fuse in a moulded plug needs to be changed, the fuse cover must be refitted. The appliance
must not be used without the fuse cover fitted.
If the plug is unsuitable, it should be dismantled and removed from the supply cord and an
appropriate plug fitted as detailed. If you remove the plug it must not be connected to a 13 amp
socket and the plug must be disposed of immediately.
If the terminals in the plug are not marked or if you are unsure about the installation of the plug
please contact a qualified electrician.
PREPARING FOR USE
Make sure your multi-cooker is switched off and unplugged from the mains supply socket
before cleaning. Never immerse the heating base, cord or plug in water or any other liquid
• Before using your multi-cooker for the first time, wash the lid, cooking bowl, 2-way rack and rice
measure in warm, soapy water. Rinse and dry thoroughly. Do not use harsh abrasives, chemicals
or oven cleaners.
• Before cooking for the first time, wipe the interior of the cooking bowl with a light coat of cooking
oil to condition the cooking surface.
• Using a damp cloth or sponge, wipe the exterior and interior of the heating base. Use a mild
detergent solution. Dry thoroughly.
IMPORTANT NOTES
: Some countertop and table surfaces are not designed to withstand the
prolonged heat generated by certain appliances. Do not set the heated unit on a surface that may be
damaged by heat. We recommend placing an insulated pad or suitably sized trivet under your multi-
cooker to prevent possible damage to the surface.
13A
Blue
(Neutral)
Brown
(Live)
Fuse
Green/Yellow
(Earth)
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
Ensure that the outer sheath of
the cable is firmly held by the cord grip
