The Remote Panic feature is designed for situations in which the user feels
threatened and/or in need of attracting attention.
• Remote Panic allows you to activate the siren and flashing lights from
the transmitter, with the enhanced choice of having the doors lock, or
unlock when doing so.
• Remote Panic can be activated anytime, whether the vehicle’s ignition is
turned on or off, and has a 30 second duration (60 seconds is optional)
unless it is deactivated earlier by using the transmitter.
• At the end of the Remote Panic cycle the system will reset, enter the
armed state, and lock the doors (even if it was originally activated with
the Upper Right “Unlock” Button).
Page 12
OTHER TRANSMITTER OPERATIONS
The previous sections have described only the most basic everyday opera-
tions of your Crime Guard system. The transmitter is also capable of sev-
eral other optional functions.
The transmitter can also silently arm or disarm the system. Pressing the
Lower Left Button twice simply reverses, or “toggles” the armed or dis-
armed condition of the system, without the normal confirmation chirps.
Two auxiliary channels are available for optional uses (consider that the
transmitter operates on the first channel to arm and disarm the system).
One of these, Auxiliary Channel #2, is also capable of disarming the sys-
tem, also unlocking the doors; thus it is ideally suited for remote trunk
release. The other, Auxiliary Channel #3, cannot affect the armed or dis-
armed status of the system, nor unlock the doors as part of its operation.
THE DOORS WILL LOCK IF
ARMING, UNLOCK IF DISARMING
To Silently Arm or Disarm the System:
THE PARKING LIGHTS
WILL FLASH ONCE IF
ARMING, TWICE IF
DISARMING
Silent Arming and Silent Disarming are both operated by double-pressing the same transmitter button.
Press
2 X
THE SIREN
WILL NOT
CHIRP
Press & Release the Lower Left Button ( ) Twice
••
Page 21
• Repeat this
Step 6
for each additional feature until all features
are programmed.
#1
SecureCode Programming
1 Press (n/a)
#2
30 / 60 Second Activated Alarm Cycle 30 Seconds (U)
#3
3 / 45 Second Arming Delay
3 Seconds (L)
#4
Last Door Arming
OFF (U)
#5
Automatic Rearming
OFF (U)
#6
Auxiliary Output #2 Also Disarms System
ON (L)
#7
Parking Light Illumination Upon Disarm
ON (L)
#8
Doors Lock At Ignition “On”
ON (L)
#9
Unlock #1 At Ignition OFF
ON (L)
#10
Unlock #2 At Ignition OFF
OFF (U)
#11
Open Door Bypass To Features 8, 9, 10
ON (L)
#12
Doors Lock With Last Door Arming
OFF (U)
#13
Doors Lock With Automatic Rearming
OFF (U)
#14
Ignition-Activated Vehicle Recovery
OFF (U)
#15
Door-Activated Vehicle Recovery
OFF (U)
#16
Transmitter-Activated Vehicle Recovery
OFF (U)
#17
Chirp Confirmation
ON (L)
#18
Steady Siren or Pulsed Horn Output Steady Siren (U)
#19
Soft or Loud Horn Confirmation Chirps “Medium Loud” (:)
#20
1 or 2 Button Arming / Disarming
2 Button (U)
#21
Double Unlock Pulse
OFF (U)
#22
Total Closure Lock Output
OFF (U)
Step 7
Turn the vehicles’s ignition on or allow 10 seconds to pass without
performing any programming actions.
• The siren will sound briefly and the Status Light will go out to
confirm that the system has exited Programing Mode.
#
FEATURE
DEFAULT
The pages following explain each of the programmable features in detail,
and below is a convenient feature programming checklist, which greatly
simplifies the feature programming process.
