• Auxiliary Channel #2 may be activated anytime, provided the vehicle’s
ignition is off. While the ignition is on, the Auxiliary Channel #2 can be
operated as long as a vehicle door is open; this prevents the output from
being accidentally activated while driving.
• If feature #6 is programmed to have the Auxiliary Channel #2 disarm the
system, the doors will unlock when it is activated; and there is an audible
and visual confirmation: 3 siren chirps and one light flash if the system
also disarms, and one chirp and light flash otherwise.
• When Auxiliary Channel #2 is operated, all of the doors will unlock,
even if the vehicle is configured with Driver Door Priority unlocking.
• Auxiliary Channel #3 may be activated at any time, regardless of the
ignition being on or off, and regardless of the security system’s status.
• Auxiliary Channel #3 has no audible and/or visual confirmation.
Page 13
• Silent arming and disarming from the transmitter is for the temporary
suspension only of the confirmation chirps- i.e. for that particular arming
or disarming operation. A programmable feature can turn the chirp con-
confirmation off permanently, should it be desired.
CAN OPERATE OPTIONAL
CAR STARTER MODULE
CAN OPERATE OPTIONAL
WINDOW ROLL-UPS
EXAMPLES:
Hold 3
seconds
Press & Hold the Lower Right Button ( )
for 1 Second
•••
To Activate Auxiliary Channel #3:
TYPICALLY USED FOR
OPTIONAL TRUNK
RELEASE
IF ARMED, THE SYSTEM
WILL DISARM, WITH
3 SIREN CHIRPS
AND 1 LIGHT
FLASH
IF THE SYSTEM IS NOT ARMED,
CONFIRMATION IS 1 SIREN CHIRP
AND 1 LIGHT FLASH
THE DOORS WILL UNLOCK
To Activate Auxiliary Channel #2:
Press & Hold the Lower Left Button ( )
for 3 Seconds
••
(Trunk Release)
Hold 3
seconds
Page 20
To Change a Feature:
To Access Programing Mode and Change Features:
features. Once the system is in Programming Mode, a 10 second period
without programming activity will cause the system to automatically exit
Programming Mode. Features can be selected in any order as desired.
Step 4
Within 10 seconds, press and release the Valet Switch the same
number of times as the desired feature’s number.
• The siren will chirp and the Status Light will flash as many times
as the Valet Switch was pressed to indicate the feature number
which is now accessed.
To Access a Feature:
Step 3
Within 5 seconds, press and release the Valet Switch 5 times.
• The siren will chirp then sound briefly and the Status Light will
flash to confirm that the system is entering Programing Mode.
• Once in Programming Mode, if 10 seconds of no programming
activity occurs, the system will exit Programming Mode. Pro-
gramming activity is the pressing of the Valet Switch to select a
feature or pressing a transmitter button once a feature is selected.
Step 2
Turn the ignition off.
Step 1
Turn the vehicles’s ignition on.
Step 6
If there are more features to be programmed, within 10 seconds
of the previous action press and release the Valet Switch the
number of times as the next desired feature’s number.
• Again the siren will chirp and the Status Light will flash as many
times as the Valet Switch was pressed to indicate the new
feature number which is now accessed.
• Use the transmitter as described in
Step 5
to change the newly
accessed feature as desired.
To Access and Change further Features:
Step 5
After accessing the desired feature, within 10 seconds press and
release either the transmitter’s Upper Left “Lock” Button or its
Upper Right “Unlock” Button.
• Pressing the Upper Left Button turns the feature ON; the siren
will chirp once and the Status Light will turn on.
• Pressing the Upper Right Button turns the feature OFF; the siren
will chirp twice and the Status Light will turn off.
