Attach a J-Box Module
A J-box module, such as the ZUMMESH-NETBRIDGE or ZUMMESH-CCO
(both not included), can be attached to any J-box device.
NOTE:
For product specifications and additional installation details,
refer to the ZUMMESH-NETBRIDGE Quick Start (Doc. 7955) or
ZUMMESH-CCO Installation Guide (Doc. 7935) at
for details.
Attach the J-box module to the ZUMMESH-JBOX device.
1. Use a flat-head screwdriver to remove the cover on the
ZUMMESH-JBOX device. Insert the flat-head screwdriver into the slot
next to the cover and pry upward to remove the cover.
2. Align the ports on the J-box module and the ZUMMESH-JBOX device,
and then insert the J-box module into the ZUMMESH-JBOX device.
The J-box module snaps into place.
If the J-box module needs to be removed, place your thumb on the side of
the J-box module that is closest to the J-box and gently push the module
away from the J-box. The module should easily separate from the J-box
device.
9
ZUMMESH-JBOX Series
Quick Start
Zūm™ Mesh Wireless J-Box Load Controllers
