4. Tap the check box to the left of the device's name to bind the keypad
to that device. When selected, the box will contain a check mark.
NOTE:
To identify the connected load(s), press the information icon
to the right of the device name. The connected load(s) will flash
slowly.
5. Tap Save selected associations to save the binding settings.
Local Binding Configuration
Local Binding configuration is used when all load controllers in the Zūm
space are accessible (i.e., there are no J-box load controllers in the Zūm
space).
To change the load controllers that are bound to the keypad:
1. Enter Binding mode.
a. Press and hold both the top and bottom buttons until the LED
lights (about 5 seconds).
b. Press the top button three times.
c. Press the bottom button once. The LED on the keypad flashes
three times, pauses, then repeats.
l
The LED flashes quickly to indicate that the load controller is
bound.
l
The LED flashes slowly to indicate that the load controller is not
bound.
13
ZUMMESH-JBOX Series
Quick Start
Zūm™ Mesh Wireless J-Box Load Controllers
