Crestron TPS-ENET, Руководство по эксплуатации и установке

Страница: 23 / 28

Crestron TPS-ENET Ethernet Card for TPS/Tilt Panel
Expanded PRO2 System Tree
C2Z Card Slot in Configuration Manager
The C2Z Card Slot can accept a C2ENET card. Once a C2ENET card is
configured in a C2Z Card Slot, the slot allows Ethernet communication
between the TPS touchpanel and the control system.
In Configuration Manager, drag the C2ENET card (for example, the
C2ENET-2) from the Plug-in Control Cards | Cards (2-Series Z Bus)
folder of the
Device Library and drop it on the PRO2 C2Z Card Slot in
System Views . The System Views upper pane displays the Ethernet Units
icon below the PRO2 graphic. The PRO2 system tree displays the
C2ENET-2 in Slot 8 as shown below.
C2ENET-2 Device, Slot 8
Drag the appropriate Ethernet TPS touchpanel (for example, the
TPS-6000 w/TPS-ENET) from the
Touchpanels folder and drop it on
Slot 8 in System Views . The lower pane shows the touchpanel in IP-ID as
shown on next page.
Operations & Installation Guide - DOC. 6016 Ethernet Card for TPS/Tilt Panel: TPS-ENET
•
19