Crestron
TPS-ENET
Ethernet Card for TPS/Tilt Panel
Accessing the “Port Settings” Window
6. Select the appropriate connection type. Verify that
RS-232
and
an available
COM
port (COM 1 is shown on the next page) is
selected. Verify that the Viewport settings match the RS-232
Menu of the configured touchpanel. If not, the Viewport
settings can be modified to match the touchpanel settings or the
touchpanel settings can be modified to match the Viewport.
NOTE:
The “Port Settings” window (refer to graphic on next page)
shows the default RS-232 settings (Baud Rate: 115200, Parity: None,
Data Bits: Eight, and Stop Bits: One) for TPS panels when shipped from
the factory.
Operations & Installation Guide - DOC. 6016
Ethernet Card for TPS/Tilt Panel: TPS-ENET
•
11
Содержание TPS-ENET
Страница 1: ...Crestron TPS ENET Ethernet Card for TPS Tilt Panel Operations Installation Guide ...
Страница 4: ......
