Crestron TPS-ENET, Руководство по эксплуатации и установке

Страница: 22 / 28

Ethernet Card for TPS/Tilt Panel Crestron TPS-ENET
Programming with SIMPL Windows
NOTE : The following assumes that the reader has knowledge of SIMPL
Windows. If not, refer to the extensive help information provided with
the software.
NOTE : In the following description, the PRO2 control system is used.
SIMPL Windows is Crestron's software for programming Crestron
control systems. It provides a well-designed graphical environment with
a number of workspaces (i.e., windows) in which a programmer can
select, configure, program, test, and monitor a Crestron control system.
SIMPL Windows offers drag and drop functionality in a familiar
Windows

environment.
This section explains how to create a SIMPL Windows program that
includes a TPS-ENET equipped touchpanel.
Configuration Manager is where programmers “build” a Crestron control
system by selecting hardware from the
Device Library . In Configuration
Manager, drag the PRO2 from the Control Systems folder of the Device
Library and drop it in the upper pane of the System Views . The PRO2
with its associated communication ports is displayed in the System Views
upper pane as shown on below.
PRO2 System View
The System Views lower pane displays the PRO2 system tree (refer to
graphic on next page). This tree can be expanded to display and
configure the communications ports.
18
•
Ethernet Card for TPS/Tilt Panel: TPS-ENET Operations & Installation Guide - DOC. 6016