Crestron TPMC-V12 & TPMC-V15, Руководство по эксплуатации

Страница: 51 / 76

Crestron TPMC-V12/15 V-Panel™ Integrated 12” & 15” Touch Screens
Save & Reboot and Shutdown Details
To save any changes and reboot the touch screen, touch Save & Reboot , located in
the lower right section of the setup menu.
To turn off the touch screen, touch Shut Down , located in lower right section of the
setup menu. This is the recommended method for shutting down the touch screen.
After the touch screen has shut down, the power supply can be safely removed from
the touch screen.
Exit Details
Touch Exit to leave the setup menu and return to the project. If no project has been
loaded, the touch screen will display an error message and return to the setup menu.
Hardware Hookup
Ventilation The TPMC-V12/15 should be used in a well-ventilated area.
To prevent overheating, do not operate this product in an area that exceeds the
environmental temperature range listed in the table of specifications.
Connect the Device The TPMC-V12/15 can be connected using the included TPMC-V-IMCW interface
module or (if the video inputs provided by the TPMC-V-IMCW are not needed) it
can be connected directly to a Crestron control system (sold separately).
Make the necessary connections as called out in the illustration that follows this
paragraph. Apply power after all connections have been made.
When making connections to the TPMC-V12/15, use Crestron power supplies for
Crestron equipment.
Hardware Connections for the TPMC-V12/15 Using TPMC-V-IMCW (TPMC-V15 Shown)
VIDEO / LAN:
To TPMC-V-IMCW
24 Y Z G:
To TPMC-V-IMCW
USB:
To Mouse, Keyboard
or Flash Drive
MEMORY EXPANSION:
For MMC Compatible Card
Hardware Connections for the TPMC-V12/15 Without Using TPMC-V-IMCW (TPMC-V15 Shown)
VIDEO / LAN*:
To LAN
24 Y Z G:
To Cresnet Network
or Power Supply
USB:
To Mouse, Keyboard
or Flash Drive
MEMORY EXPANSION:
For MMC Compatible Card
* Negates video connectivity
Operations Guide – DOC. 6940B V-Panel™ Integrated 12” & 15” Touch Screens: TPMC-V12 & TPMC-V15
•
47