Software
Crestron
Touch The PC Driver
window, a COM port other than the default COM1 can be selected, to specify the
COM port from which the PC will receive the Touch the PC V2 commands.
Setup.exe will finish with a prompt to restart the computer. The computer
MUST
be
restarted.
The Windows
Start
menu will now list UPDD as a program, and the system tray of
the Windows status bar will include icons shown below.
Pointer Device Settings & Event Scheduler Icons
After the system has been configured and programmed as outlined in the rest of this
guide, it can be calibrated (or tested). Right-click the Pointer Device Settings icon
and as shown below, select
Calibrate
from the Device Manager menu. Select
Device 1 | Normal
and calibrate the screen by following the onscreen directions.
Select Calibrate
The COM port can be changed by selecting
Adjust settings
from the Device
Manager menu. As shown in the following illustration, open the
Hardware
tab and
choose a COM port from the drop-down list.
Hardware Tab
NOTE:
For additional keyboard functionality programmed into the touchpanel,
refer to “Appendix A – Additional Keyboard Functionality” on page 20.
4
•
Touch the PC Driver
Programmer’s Guide – DOC. 5916B
