Software
Crestron
Touch The PC Driver
IP Table
3. As shown below, using the
addm
(ADDMASTER) command to add a
CIP node to the master list of the touchpanel, enter the information in
the following format with spaces (no period or underscore) between the
entries: CIP ID from SIMPL Windows (example of
4
is shown), IP
address of touchpanel (example of
132.149.010.147
is shown), and
Device ID (example of
4
is shown). To remove an IP address, use the
REMM command.
NOTE:
The Device ID of the Touch the PC V2
does not have to match
the CIP
ID. It will also be used in step 6 of “VT Pro-e Programming
that begins on page 14.
4. As shown below, use the
ipt
command to display the updated IP table
on the touchpanel.
Updated IP Table
5. Proceed to “SIMPL Windows Programming” that begins on the next
page.
12
•
Touch the PC Driver
Programmer’s Guide – DOC. 5916B
