Crestron Sonnex SWAMP(I)-24X8, Руководство по эксплуатации

Страница: 12 / 56

Sonnex Multiroom Audio System Crestron
SWAMP(I)-24X8
6
•
Sonnex Multiroom Audio System: SWAMP(I)-24X8 Operations Guide – DOC. 7049E
Unamplified Outputs
For applications requiring line level zone outputs, Crestron offers the SWE-8 Sonnex
Multiroom Audio Unamplified Expander (sold separately). Each SWE-8 provides an
assortment of analog line level, S/PDIF digital, and Crestron Home (CH) CAT5
balanced audio outputs, offering a solution for routing audio to AV receivers,
powered subwoofers, headphone amplifiers, phone systems (for music-on-hold), and
other audio equipment.
70/100 V Option
Any amplified zone output can be converted to 70- or 100-volt output using one or
more Sonnex Output Transformers (SAT-70V/100V-2 or SAT-70V/100V-4, sold
separately). A 70/100 V (constant-voltage) speaker system allows for the connection
of numerous speakers per circuit and long wire runs using small-gauge wire. Typical
applications include outdoor speaker zones, commercial retail spaces, hallways, and
common areas.
Intelligent Monitoring and Protection
To help ensure the most seamless user experience and long-lived operation, Sonnex
includes several ways to keep tabs on its operating status and health. On its own,
Sonnex possesses the intelligence to protect itself from many types of faults
including over temperature, over current, over voltage, under voltage, and dc offset
on any channel. In the event of a fault, the front panel LCD provides clear fault
indication to speed the troubleshooting of incorrect wiring, poor rack ventilation, and
other unforeseen issues. Fault alerts may also be sent to a system touch screen or
mobile device, and integrators can even monitor and track the data remotely through
Crestron’s Fusion RV ®
software to ensure a rapid service response.
Ultimate Integration
Without question, Sonnex delivers unprecedented intelligence from source to
speaker. Via Cresnet
®*
or high-speed Ethernet, Sonnex affords incredible integration
potential as part of a complete Crestron system, enabling seamless control of every
room and source through a wide selection of touch screens, keypads, wireless
remotes, computers, and mobile devices. Complete setup is afforded via USB or
Ethernet, using Sonnex Tools software, part of the Crestron Toolbox™ installer
toolkit.
* If using Cresnet as the control system interface, system expansion is limited to one expander. Support
for more than one expander requires Ethernet as the control system interface.