Crestron Sonnex SWAMP(I)-24X8, Руководство по эксплуатации

Страница: 11 / 56

Crestron
SWAMP(I)-24X8
Sonnex Multiroom Audio System
Operations Guide – DOC. 7049E Sonnex Multiroom Audio System: SWAMP(I)-24X8
•
5
• Dynamic Range Control (DRC) is a user-selectable feature to help keep
everything at a consistent level, whether in a quiet bedroom, a loud
swimming pool, or an outdoor patio, facilitating a more cohesive listening
experience.
•
Sonnex Speaker Protect ® (SSP) output limiting assures maximum headroom
while preventing damage to the amplifier or speakers. SSP ® output limiting
lets the installer set the protection to match the speakers’ power handling
capability, achieving a transparent effect right up to the limits of the speaker
device.
CAUTION: As speaker ratings vary greatly across manufacturers, there is
no guarantee that SSP protects against speaker damage in all situations.
•
5-Band Equalizer provides the choice of graphic or parametric 5-band EQ.
Using Sonnex Tools software and a wireless laptop, the installer can easily
move from room to room, sculpting the sound for optimal audio clarity and
impact.
Speaker Profiles
The Speaker Profiles feature in Sonnex Tools alleviates many repetitive adjustments
from room-to-room, and project-to-project, by allowing installers to save a complete
set of EQ and SSP settings for each type of speaker, room, and customer. Tuning a
complete project can be as simple as loading the appropriate Speaker Profile for each
zone, effectively pre-tuning the whole system before a single note of music or test
signal is even played.
Output Bussing
The spacious, open floor plans typical of today’s homes and businesses commonly
present multiple adjacent listening zones with no sonic boundary between them such
as a kitchen and dinette, a living room and dining room, or an outdoor pool and
terrace. One click in Sonnex Tools instantly busses adjacent zones together to
function as one group while preserving the individual speaker profile settings.
Volume offset adjustments easily allow for balancing the levels of each bussed zone
for smooth, even coverage of the complete space.
Passive Subwoofer Support
Sonnex provides extended low frequency performance in any room, providing high-
performance biamplification capability to support a passive in-wall, in-floor, or
freestanding subwoofer. Configuring Sonnex to handle a 2.1 speaker system is both
simple and powerful, offering the choice of 2 nd or 4 th order active crossover filters for
each sub and satellite output, plus up to four parametric EQ filters for room
correction and tonal enhancement. With 400 watts available in bridged mode, there
is plenty of power on hand to fill any room with deep, gratifying bass. *
Active (powered) subwoofers are supported using the SWE-8 Sonnex Multiroom
Audio Unamplified Expander (sold separately).
* Passive subwoofer support requires one zone output to drive the main left and right (i.e., satellite)
speakers, plus one additional zone output to drive a subwoofer with 140 watts @ 8 ohms, or two
additional zone outputs bridged to drive a subwoofer with 400 watts @ 8 ohms.