background image

Touchpanel Media Centers   

Crestron Isys i/O

 

TPMC-15/17 Tilt Series

 

Physical Views of the TPMC-15 & TPMC-17 Touchpanel (Side with Min. and Max. Angle) 

13.74 in

(34.90 cm)

14.17 in

(35.99 cm)

12.40 in

(31.50 cm)

45°

 

Ports and Pushbuttons 

All connections to the TPMC-15 and TPMC-17 are made through the ports on the 
rear panel. Refer to the illustrations and descriptions that follow. 

NOTE:  

An integrated cover and cable strain relief hide connections to the 

touchpanel. For more information on the cover and strain relief, refer to “Cable 
Management” on
 page 48.

  

NOTE: 

 An interface connector for the NET port is provided with the TPMC-15 and 

TPMC-17. 

RS-232 

 

This 6-pin RJ-11 connector mates with a 9-pin serial port of a PC. The connecting 
cable is not supplied. Use this port to establish a direct connection between the 
touchpanel and a PC without a control system or network connection. Once the direct 
connection is established, touchpanel files and firmware updates can be uploaded to 
the touchpanel. Additionally, the touchpanel’s diagnostic tools can be accessed over 
the direct connection. In the event that modular cables or an RJ-11 to DB9F adapter 
is not available, the following table and diagram provide information so that the cable 
can be fabricated on site. Refer to “Touch Screen” on page 30 for RS-232 port 
configuration settings.

 

 

14  

  Touchpanel Media Centers:  Crestron Isys i/O™ TPMC-15/17 Tilt Series Operations 

Guide - DOC. 6344 

Содержание Isys i/O TPMC-15-CH

















































































Отзывы: