Crestron iMedia IM-RXV1, Руководство по эксплуатации и установке

Страница: 11 / 28

Crestron IM-RXV1 & IM-RXV3 iMedia Receiver/Processor with Video
Connectors, Controls, & Indicators
# CONNECTORS,
CONTROLS, &
INDICATORS
CONTROLS, &
INDICATORS
DESCRIPTION DESCRIPTION
1 POWER INPUT Power connector require 3.0 A @ 18 VDC
from included power supply.
2 PWR LED Indicates power from the included power
supply.
3 SOFTWARE RESET Recessed below the front panel. Press this
button while the system is running to restart
the program.
4 RELAY OUTPUT (2) Normally open isolated relays; rated to
2A, 50V (AC/DC) with MOV arc suppression
across contacts for control of “real world”
loads. A nine-pin terminal block interface
connector is included.
5 INPUT (4) Digital inputs. Connect to 24 VDC (max)
logic output or contact closure from external
devices. A five-pin terminal block interface
connector is included.
6 INPUT LED Indicates when an input signal is received on
any of the four digital inputs.
7 IR LED Indicates when an output signal is
transmitted from the IR OUT port.
8 IR OUT (1) 3.5mm tip-ring-sleeve (TRS) mini-phone
port enables infrared communications to
other devices; Use Crestron Infrared Emitter
Probe (part number STIRP, sold separately)
for controlling infrared devices.
Tip: IR Data Out
Ring: No Connection
Sleeve: Ground
9 COMPUTER One 6-pin RJ-11 female, computer console
port. Use with STCP-502 serial cable (not
included).
PIN FUNCTION PIN FUNCTION
1 CTS 4 TXD
2 GND 5 RTS
3 RXD 6 No Connect
Tip
Ring
Sleeve
(Continued on following page)
Operations & Installation Guide – DOC. 6478 iMedia Receiver/Processor with Video: IM-RXV1 & IM-RXV3
•
7