Crestron iMedia IM-RXV1, Руководство по эксплуатации и установке

Страница: 18 / 28

iMedia Receiver/Processor with Video Crestron IM-RXV1 & IM-RXV3
Connect the Device Make the necessary connections as called out in the illustrations that follows this
paragraph. Apply power after all connections have been made.
When making connections to the IM-RXV1 and IM-RXV3, consider the following:
•
Use Crestron power supplies for Crestron equipment.
•
The included cable cannot be extended.
Hardware Connections (Front, IM-RXV3 shown)
IM INPUT:
iMEDIA PORT RECEIVES
AUDIO, VIDEO, AND RGB
SIGNALS
AUDIO:
BALANCED OR
UNBALANCED OUTPUT
TO AMPLIFIER
SPEAKER:
AMPLIFIED STEREO
AUDIO OUTPUT
NOTE: For optimum performance, Crestron strongly recommends using
CresCAT-IM cable, available from Crestron. Other high-quality/low skew
CAT5e/CAT6 wiring may also be used with varying performance.
Hardware Connections (Rear)
POWER:
FROM POWER
SUPPLY
(18 VDC, 3.0 A)
RELAY OUTPUT:
TWO LOW VOLTAGE
CONTACT CLOSURE
RELAYS
IR OUTPUT:
TO STIRP
LAN:
10/100 BASE-T
ETHERNET TO
LAN
COMPOSITE VIDEO OUTPUT:
TO DISPLAY DEVICE
DIGITAL INPUTS:
FOUR SCHMIDT
TRIGGER TYPE
COMPUTER:
RJ-11 SERIAL PORT
TO LOAD FILES OR
CONSOLE
COM:
BI-DIRECTIONAL RS-232 WITH
HARDWARE AND SOFTWARE
HANDSHAKING AND MODEM CONTROL
RGB OUTPUT:
TO DISPLAY DEVICE
NOTE: the power supply cable is equipped with a snap lock connector. Always
disconnect the power cable by pulling back on the snap lock of the connector. Never
pull the power cable by the cord.
14
•
iMedia Receiver/Processor with Video: IM-RXV1 & IM-RXV3 Operations & Installation Guide – DOC. 6478