Crestron iMedia IM-RXV1, Руководство по эксплуатации и установке

Страница: 13 / 28

Crestron IM-RXV1 & IM-RXV3 iMedia Receiver/Processor with Video
Connectors, Controls, & Indicators (Continued)
# CONNECTORS,
CONTROLS, &
INDICATORS
DESCRIPTION
13 RGBHV (1) DB15HD, female, RGB output. Displays
RGB signal from RGB source connected to
IM transmitter.
PIN FUNCTION PIN FUNCTION
1 Red Video 9 No Connect
2 Green
Video 10 Ground
3 Blue Video 11 No Connect
4 Reserved 12 Monitor Sense 1
5 Ground 13 Horizontal Sync
6 Red
Ground 14 Vertical Sync
7 Green
Ground
8 Blue
Ground
15 Monitor Sense 2
14
IM INPUT & PEAKING
CONTROL
This eight-pin RJ-45 transport port (three on
IM-RXV3) is the input connection of the
iMedia cable. It carries audio and video
signals over CresCAT-IM cable from an
iMedia transmitter (such as the IM-FTCC-B,
IM-TCC, or IM-WCC).
The peaking control is used during setup for
video cable length compensation. Refer to
“iMedia Wizard Configuration” on page 15 for
additional details.
15 AUDIO OUT This 5-pin detachable terminal block audio
output connector provides
balanced/unbalanced line-level left and right
audio for application to an external amplifier.
16 SPEAKER OUT The left and right speaker connectors (two
2-pin detachable terminal block connectors,
5 mm spacing) provide 20 Watts of amplified
audio (10 Watts per channel) into 8
Ω
speakers.
Operations & Installation Guide – DOC. 6478 iMedia Receiver/Processor with Video: IM-RXV1 & IM-RXV3
•
9