Crestron iMedia IM-RXV1, Руководство по эксплуатации и установке

Страница: 6 / 28

iMedia Receiver/Processor with Video Crestron IM-RXV1 & IM-RXV3
audio, and control signals for connection to the display device. Adjustable bandwidth
compensation is provided to maximize image quality over long cable runs.
Integrated Audio
The IM-RXV1 and IM-RXV3 include a built-in 20 watt stereo amplifier to drive a
pair of 8 ohm speakers. Balanced line-level outputs are also provided to allow the
audio signal to be connected directly to inputs on the display device or fed to a pair
of powered speakers. Onboard digital signal processing affords adjustment of master
volume, bass, treble and balance settings at setup.
Display Control
The IM-RXV1 and IM-RXV3 contain both IR and bidirectional RS-232 ports to
enable full control of the display device. Two relay ports are also included for
control of a projection screen or lift. In addition, the four digital input ports can
accept the direct connection of room occupancy sensors and power sensors for
enhanced automation and monitoring.
e-Control
®
2 and RoomView
®
Despite its simple design and low cost, the IM-RXV1 and IM-RXV3 support
Crestron's powerful e-Control 2 XPanel and RoomView applications, delivering the
industry's best help desk and resource management solution for any number of rooms
equipped with iMedia.
Fast, Easy Setup
System setup takes mere minutes using iMedia Wizard software, providing easy
start-to-finish configuration, adjustment, and documentation.
Applications
The IM-RXV1 and IM-RXV3 are part of the Crestron
®
iMedia line of network
devices, room control systems and signal routing solutions. The line of iMedia
devices includes receivers and transmitters. Consult the Crestron website for a
complete and current listing of the iMedia product line.
NOTE: The composite video output of the IM-RXV1 and IM-RXV3 are not
enabled when using the iMedia transmitters without composite video inputs.
The IM-RXV1 and IM-RXV3 can be placed on a table or mounted to a surface using
the included brackets. These receivers can also be mounted to a pipe using the
optional pole mount kit MK-IM-RX.
NOTE: The IM-RXV1 and IM-RXV3 are not Cresnet
®
devices.
The IM-RXV1 and IM-RXV3 are part of a family of compatible iMedia devices, all
capable of working together to put on simple to complex media presentations. The
following diagram shows the interconnections.
2
•
iMedia Receiver/Processor with Video: IM-RXV1 & IM-RXV3 Operations & Installation Guide – DOC. 6478