Crestron iLux CLS-C6 Скачать руководство пользователя страница 10

Страница: 10 / 92

Crestron

CLS-C6/C6M & CLSI-C6/C6M

iLux Integrated Lighting System

Operations Guide – DOC. 6347E

iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M

•

CLS-C6 Specifications (Continued)

SPECIFICATION

DETAILS

Available Accessories

(Continued)

CLS-IRHT8

iLux IR Handheld Remote

CNPWS-75

Cresnet Power Supply

GLS-LOL

Crestron Green Light Photocell , Open-Loop

GLS-SIM

Sensor Integration Module

TPS-6L

Isys

5.7" Wall Mount Touch Screen

For a list of compatible ballasts, visit

www.crestron.com/lightingcompatibility

Larger loads and additional load types can also be supported using Crestron CLS-EXP Series expansion

modules (sold separately).

The latest versions can be obtained from the Crestron Web site. Refer to NOTE after last footnote.

Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product

Catalog for a complete list of 2-Series control systems.

NOTE

: Crestron software and any files on the Web site are for Authorized Crestron

dealers and Crestron Authorized Independent Programmers (CAIP) only. New users may

be required to register to obtain access to certain areas of the site (including the FTP site).

Physical Description

This section provides information on the connections, controls and indicators

available on the CLS-C6.

CLS-C6 Physical View

Содержание iLux CLS-C6





























































































Результаты поиска

Содержание iLux CLS-C6

Отзывы:

Crestron iLux CLS-C6, Руководство по эксплуатации, Страница: 10 / 92

Результаты поиска

Содержание iLux CLS-C6

Отзывы: