background image

Additional Information

Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.

Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is
licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at

www.crestron.com/legal/software_license_agreement

.

The product warranty can be found at

www.crestron.com/warranty

.

The specific patents that cover Crestron products are listed at

www.crestron.com/legal/patents

.

Certain Crestron products contain open source software. For specific information, visit

www.crestron.com/opensource

.

Crestron, the Crestron logo, and FlipTop are either trademarks or registered
trademarks of Crestron Electronics, Inc. in the United States and/or other countries.
Other trademarks, registered trademarks, and trade names may be used in this
document to refer to either the entities claiming the marks and names or their
products. Crestron disclaims any proprietary interest in the marks and names of
others. Crestron is not responsible for errors in typography or photography.

©2020 Crestron Electronics, Inc.

Doc. 8216G

05/22/20

9

FT2-700-MECH Series

Quick Start

FlipTop™ FT2 Series, 700 Size, Mechanical

Содержание FlipTop FT2-700-MECH










Отзывы: