FT2-700-MECH-ACUSB-A and FT2-700-MECH-ACUSB-B Only
1
FT2A-CHGR-USBA-BASIC, USB Rapid Charging Module
(P/N 6510719)
1
Power Pack, Universal Wall Mount, 5 VDC, 5 A, 100-240 VAC
(P/N 2053675)
Mount the FlipTop Assembly
A mounting hole is required for an FT2-700-MECH installation. Use the
included template to cut a new mounting hole for new installations. The
FT2-700-MECH may also replace an FT-600 FlipTop and use the existing
mounting. When determining the location for the FT2-700 assembly,
consider where users will be seated and their proximity to the FT2-700
assembly's modules and retractors. Refer to the
series
cable retractors for above-the-table cable pull-out lengths.
For a new mounting, follow sections
and
. To use the mounting hole of an existing FT-600
FlipTop assembly, follow sections
Replace the FT-600 FlipTop Assembly
and
Cut the Mounting Hole
A saw, tracing utensil, and the included cutout template are required to
cut the mounting hole.
1. Check the table surface and the area beneath the table. Clear any
obstructions that may impede the installation or functionality of the
FT2-700 assembly, retractors, and accessories.
2. Using the included cutout template, trace an outline of the mounting
hole onto the table.
3. Cut the mounting hole in the table with an appropriate saw.
2
FT2-700-MECH Series
Quick Start
FlipTop™ FT2 Series, 700 Size, Mechanical