Install the Locking Bars
1. Position the locking bars so that the screws attached to the locking
bars engage the screw holes in the FT2-700 assembly.
2. Using a manual torque screwdriver set to its lowest possible setting,
hand tighten the locking bar screws until the locking bars are secured
to the FT2-700 assembly.
CAUTION:
Do not overtighten the locking bar screws.
Install the Bezel
Place the bezel onto the FT2-700 assembly so that the retractable lid fits
inside the bezel opening. The bezel is held in place using magnets.
7
FT2-700-MECH Series
Quick Start
FlipTop™ FT2 Series, 700 Size, Mechanical