background image

DigitalMedia™ CAT & Fiber Transmitters 100 

 

Crestron 

DM-TX-100/-F

 

You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for 
a fee. 

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and 
distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: 

 

a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. 

 

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any 
part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. 

 

c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such 
interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a 
notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under 
these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does 
not normally print such an announcement, your work based on the Program is not required to print an announcement.) 

 

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program and 
can be reasonably considered independent and separate works in themselves, then this License and its terms do not apply to those 
sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work 
based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend 
to the entire whole and thus to each and every part regardless of who wrote it. 

 

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to 
exercise the right to control the distribution of derivative or collective works based on the Program. 

 

In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a 
volume of a storage or distribution medium does not bring the other work under the scope of this License. 

 

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the 
terms of Sections 1 and 2 above provided that you also do one of the following: 

 

a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of 
Sections 1 and 2 above on a medium customarily used for software interchange; or, 

 

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of 
physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed 
under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, 

 

c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is 
allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an 
offer, in accord with Subsection b above.) 

 

The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete 
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to 
control compilation and installation of the executable. However, as a special exception, the source code distributed need not include 
anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel and so on) of the 
operating system on which the executable runs, unless that component itself accompanies the executable. 

 

If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access 
to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to 
copy the source along with the object code. 

 

4. You may not copy, modify, sublicense or distribute the Program except as expressly provided under this License. Any attempt 
otherwise to copy, modify, sublicense or distribute the Program is void and will automatically terminate your rights under this 
License. However, parties who have received copies or rights, from you under this License will not have their licenses terminated so 
long as such parties remain in full compliance. 

 

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or 
distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by 

30  

  DigitalMedia™ CAT & Fiber Transmitters 100: DM-TX-100/-F 

Operations Guide – DOC. 6810C 

Содержание DigitalMedia DM-TX-100F





































Отзывы: