DigitalMedia™ CAT & Fiber Transmitters 100
Crestron
DM-TX-100/-F
Check Network Wiring
Use the Right Wire
To ensure optimum performance over the full range of your installation topology,
use Crestron Certified Wire only. Failure to do so may incur additional charges if
support is required to identify performance deficiencies because of using improper
wire.
Calculate Power
CAUTION:
Use only Crestron power supplies for Crestron equipment. Failure to
do so could cause equipment damage or void the Crestron warranty.
CAUTION:
Provide sufficient power to the system. Insufficient power can lead to
unpredictable results or damage to the equipment. The
EIG
connector on the DM
switcher is used to bring in external power. Additional power is rarely required as
switchers provide enough power for most typical configurations. Please use the
DMNet Power Calculator to help calculate how much power is needed for the
system (
).
Refer to the following table for maximum cable lengths using various cables.
Maximum DM Cable Length
Cable Type:
DM-CBL DigitalMedia Cable
Resolution:
Maximum length
without, between,
before or after
repeaters
Maximum total
length using up
to 2 repeaters
720p, 1080i, 1080p24
200 ft (60 m)
450 ft (137 m)
1024 x 768 @ 75 Hz
200 ft (60 m)
450 ft (137 m)
1080p60
150 ft (45 m)
450 ft (137 m)
1280 x 1024 @ 75 Hz
150 ft (45 m)
450 ft (137 m)
1920 x 1200 @ 60 Hz
150 ft (45 m)
450 ft (137 m)
1600 x 1200 @ 60 Hz
125 ft (38 m)
375 ft (114 m)
1080p60 Deep Color
50 ft (15 m)
150 ft (45 m)
NOTE:
All Crestron certified DMNet wiring must consist of two twisted pairs. One
twisted pair is the +24V conductor and the GND conductor and the other twisted pair
is the A conductor and the B conductor.
NOTE:
1080p60 is the most common resolution used in residential installations.
26
•
DigitalMedia™ CAT & Fiber Transmitters 100: DM-TX-100/-F
Operations Guide – DOC. 6810C
Содержание DigitalMedia DM-TX-100F
Страница 1: ...Crestron DM TX 100 F DigitalMedia CAT FiberTransmitters100 Operations Guide...
Страница 4: ......
