DigitalMedia™ CAT & Fiber Transmitters 100
Crestron
DM-TX-100/-F
C2ENet Device, Slot 8 (DM-TX-100-F Shown Using Ethernet Slot on Control System)
3.
If additional DM-TX-100/-F devices are to be added, repeat step 2 for each
device. Each DM-TX-100/-F device is assigned a different
IP ID.
4.
If necessary, double click a device to open the “Device Settings” window
and change the IP ID, as shown in the following figure (DM-TX-100
shown).
“Device Settings: Crestron DM-TX-100” Window
NOTE:
The ID code specified in the SIMPL Windows program must
match the IP ID of each unit. Refer to “Identity Code” on page 14.
Program Manager
Program Manager is the view where programmers “program” a Crestron control
system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it into
Detail
View
. Each signal in the symbol is described in the SIMPL Windows help file (
F1
).
20
•
DigitalMedia™ CAT & Fiber Transmitters 100: DM-TX-100/-F
Operations Guide – DOC. 6810C
Содержание DigitalMedia DM-TX-100F
Страница 1: ...Crestron DM TX 100 F DigitalMedia CAT FiberTransmitters100 Operations Guide...
Страница 4: ......