Crestron DigitalMedia DM-NVX-350, Руководство по эксплуатации продукта

Страница: 65 / 96

Product Manual – DOC. 7839M DM-NVX-35x(C) Encoders/Decoders
•
59
Analog Audio Input or Output
Analog audio can be configured as either an input or an output:
• As an input on a DM-NVX-35x(C) device that functions as a transmitter, analog
audio can be configured as the audio source and be inserted into a network video
stream and the HDMI output. As an output on a DM-NVX-35x(C) transmitter, analog
audio can be configured to extract audio from the routed HDMI input.
• As an input on a DM-NVX-35x(C) device that functions as a receiver, analog audio
can be configured as the audio source and be inserted into the HDMI output. As an
output on a DM-NVX-35x(C) receiver, analog audio can be configured to extract
audio from the routed audio/video source—either the network stream or one of the
HDMI inputs.
NOTE: Analog audio output from a DM-NVX-350, DM-NVX-350C, DM-NVX-352, or
DM-NVX-352C is functional only when the device is receiving a 2-channel stereo input
signal. The DM-NVX-351 and DM-NVX-351C can derive a 2-channel downmix signal from
a multichannel surround sound source.
To configure analog audio, use the web interface or SIMPL Windows as discussed in the
following sections.
Using the Web Interface
Configure analog audio by clicking the Settings tab and then configuring routing and
output settings:
1. In the Routing section:
a. Set Analog Audio Mode to Insert or Extract.
Settings Tab – Routing, Analog Audio Mode Configuration