Crestron DigitalMedia DM-NVX-350, Руководство по эксплуатации продукта

Страница: 41 / 96

Product Manual – DOC. 7839M DM-NVX-35x(C) Encoders/Decoders
•
35
Using SIMPL Windows
Configure maximum color depth and color space mode in Slot-06: HDMI Out. Set the
<MaximumColorDepth> analog input join to the appropriate value for the maximum bit
depth supported by the output. Set the <ColorSpaceMode> analog input join to the
desired value for the HDMI color space.
NOTE: If HDR video is desired at the output, set the <MaximumColorDepth> analog
input join to 10-bit maximum bit depth and the <ColorSpaceMode> analog input join to
Force YCbCr422 or Force YCbCr420.
For additional information, refer to the SIMPL Windows help file.
Background Image
NOTE: Background image applies to a DM-NVX-35x(C) device that functions as
a receiver.
An image can be uploaded to the DM-NVX-35x(C) and then used as a background image
for on-screen display whenever active video content is not being displayed.
NOTE: Supported image file types are .jpeg, .jpg, and .png. The supported maximum
resolution of an image is 3840x2160 pixels. Up to 20 image files can be uploaded for a
total storage capacity of up to 100 MB.
To configure a background image, use the web interface or SIMPL Windows as discussed
in the following sections.
Using the Web Interface
To upload and configure a background image for on-screen display:
1. Click the Settings tab and then click Outputs.
2. In the Outputs table, click the Edit button.
3. Click On Screen Display.
4. In the Image Display section:
a. Set the Background Image toggle switch in the On (right) position to enable
the functionality.
b. In the Time to wait after no video is detected list box, select the number of
seconds that must pass without active video content before the background
image can be displayed. Values range from 5 to 65,535 seconds. The default
setting is 5 seconds.