Crestron DigitalMedia DM-NVX-350 Скачать руководство пользователя

Страница: 10 / 96

•

DM-NVX-35x(C) Encoders/Decoders

Product Manual – DOC. 7839M

Front Panel, DM-NVX-352

The following illustration shows the front panel of the DM-NVX-352.

DM-NVX-352 Front Panel



DEVICE: USB Type B connector, female;

USB 2.0 device port;

USB signal extender port for connection to a computer or other USB 2.0 host



HOST: USB Type A connector, female;

USB 2.0 host port;

USB signal extender port for connection of a mouse, keyboard, or any other

USB 2.0 device;

Available Power: 500 mA at 5 VDC



TX, RX, and OL LEDs: Green TX LED indicates that unit is in transmitter (encoder)

mode;

Green RX LED indicates that unit is in receiver (decoder) mode;

Green OL LED indicates an online connection to a control system via Ethernet

PD (powered device) port compatible with UPOE compliant Ethernet switch,

Crestron DM-PSU-ULTRA-MIDSPAN, or approved third-party PSE;

Green LED indicates Ethernet link status;

Amber LED indicates Ethernet activity



LAN 2: SFP port;
Accepts one Crestron SFP-1G Series SFP transceiver module;

2, 4

Green LINK LED indicates Ethernet link status;

Green ACT LED indicates Ethernet activity

The DEVICE and HOST ports cannot be used simultaneously.

Either LAN 1 or LAN 2 can be used as the primary LAN connection, allowing the other port to be used for

connection to a local network device or to another DM NVX device. The port that is used as the primary

LAN connection requires connection to a 1000BASE-T switch in order to stream network video.

The DM-NVX-352 can be powered by the connection of LAN 1 to a UPOE compliant Ethernet switch, a

Crestron DM-PSU-ULTRA-MIDSPAN, or other Crestron approved power injector (sold separately).

For additional information, refer to Answer ID 5791 in the Online Help section of the Crestron website

(

www.crestron.com/onlinehelp

). The DM-NVX-352 can also be powered using the included

power pack.

LAN 3 can connect to a fiber-optic network using the appropriate Crestron SFP-1G transceiver module (sold

separately). Refer to the SFP-1G Series Installation Guide (Doc. 7979) for information about installing

Crestron SFP-1G Series transceiver modules.



 











Содержание DigitalMedia DM-NVX-350

































































































Результаты поиска

Содержание DigitalMedia DM-NVX-350

Отзывы:

Похожие инструкции для DigitalMedia DM-NVX-350

Бренды по названию

Популярные бренды

Crestron DigitalMedia DM-NVX-350, Руководство по эксплуатации продукта

Результаты поиска

Содержание DigitalMedia DM-NVX-350

Отзывы:

Похожие инструкции для DigitalMedia DM-NVX-350

Бренды по названию

Популярные бренды