Crestron DigitalMedia DM-NVX-350, Руководство по эксплуатации продукта

Страница: 19 / 96

Product Manual – DOC. 7839M DM-NVX-35x(C) Encoders/Decoders
•
13
Encoding and Decoding Functionality
A DM-NVX-35x(C) device can be configured to function as a network AV encoder
(transmitter) or decoder (receiver):
• As an encoder, a DM NVX device allows a laptop computer, camera, or other
media source to be connected via an HDMI cable and then transmitted over the
network.
• As a decoder, a DM NVX device receives the signal from a DM NVX encoder and
feeds the signal to a display device via the HDMI output. A DM NVX decoder can
switch streams among multiple DM NVX encoders on the network alongside
locally connected HDMI sources.
To set the operating mode of a DM-NVX-35x(C) device as a transmitter or receiver, use
the web interface or SIMPL Windows as discussed in the following sections.
NOTES:
•
When DM-NVX-35x(C) devices are used with DM - NVX-E30(C) and DM-NVX-36x(C)
encoders, the DM-NVX-35x(C) devices must be in Receiver mode. When DM-NVX-
35x(C) devices are used with DM-NVX-D30(C), DM-NVX-D80-IOAV, and DM-NVX-
36x(C) decoders, the DM-NVX-35x(C) devices must be in Transmitter mode.
•
For a DM-NVX-35x surface-mountable endpoint, the SETUP button can be used to
change the operating mode from a receiver to a transmitter or from a transmitter to
a receiver. For additional information, refer to the description of the SETUP button
on page 5.
For a DM-NVX-35xC card, the front panel of the DMF-CI-8 chassis can be used to
change the operating mode. For additional information, refer to the DMF-CI-8
Supplemental Guide (Doc. 7861).
Using the Web Interface
To set the DM-NVX-35x(C) operating mode:
1. Click the Settings tab and then click Stream.
2. In the Mode drop-down list, select Receiver or Transmitter. The default setting is
Receiver (decoder).