Pan/Tilt Camera Head with Control Interface
Crestron
CPC-CAMI
Presets
In conjunction with the Crestron control system, the CPC-CAMI is capable of
“memorizing” pan/tilt positions and focus/zoom settings for a virtually unlimited
number of presets. Each preset stores a specific position and setting. Positional
feedback signals are essential to the implementation of presets; unless the lens
supports position mode. These analog signals, provided by the pan/tilt and lens,
indicate current pan/tilt position and focus/zoom setting.
Position/Rate Mode
Movement of the camera lens may occur in either position or rate mode. A jumper
board may be selected that best accommodates the mode parameters required by the
system. Refer to “Position/Rate Mode Definition” on page 13 for a more detailed
explanation of position and rate mode.
Physical Description
The CPC-CAMI, shown below, is housed in a black enclosure with two rotating
disks for the pan and tilt axes. A stop sensor is located on each side of the unit
having a rotating disk. Each disk has two adjustable locking screws. The disks also
feature heavy duty precision bearings for long life and minimal friction. The
interface box is affixed onto the sloping portion of the pan/tilt head. All electrical
connections are made to the interface box; refer to the silk-screened labels.
CPC-CAMI Physical Views
2
•
Pan/Tilt Camera Head with Control Interface: CPC-CAMI
Operations Guide - DOC. 5726A
