Crestron CPC-CAMI, Руководство по эксплуатации

Страница: 13 / 24

Crestron CPC-CAMI Pan/Tilt Camera Head with Control Interface
8. To verify this procedure, select Diagnostics | Report Network
Devices . Confirm that the CPC-CAMI has a new NET ID code.
9. Reconnect other network or modular devices that were disconnected in
step 1.
Preparation for Use
Refer to the hookup diagram below. Other than connecting the correct jumper board
first and making the power connection last, complete the connections in any order.
NOTE: Before making connections to the NET port, review the latest revision of
the Network Modular Cable Requirements (Doc. 5682) or the network
interconnection drawing (Doc. 5411). Most 4-conductor phone cables are wired in a
crisscross fashion and are not compatible with Crestron equipment. The wiring
document can be obtained from the Downloads page (CABLES and MANUALS
Libraries) of the Crestron website (
www.crestron.com) . Search for the
MODULAR.PDF or CRESNET.PDF files, respectively.
NOTE: To insure safe operation of the CPC-CAMI, all cables around the unit must
be properly “dressed” so that the cables do not strike surrounding surfaces or
equipment which would endanger safe system movement when in operation.
Hookup Connections for CPC-CAMI
Initialization
There are no specific steps required to initialize the CPC-CAMI. The unit is ready
four seconds after applying power.
Operations Guide - DOC. 5726A Pan/Tilt Camera Head with Control Interface: CPC-CAMI
•
11