Digital Video Processor
Crestron
CNX-DVP4
Reveal
Window is exposed from a selectable (N, S, E or W) direction. When another page is
selected, the window closes in the opposite direction. To illustrate this, the effect
would look like you were pulling down a projector screen handle to expose the
projector screen.
N – exposes from the south
E – exposes from the west
S – exposes from the north
W – exposes from the east
NOTE
: A video source goes off with the same effect that it went on with.
Setting up Video Effects
The following steps are required to properly set up each video effect. The Pan effect
is used as an example.
1. In VT Pro-e, in the “Video Properties” window, under the
Source
tab, select
the type of join:
Input Selection
,
Transition Duration
, or
Transition
Effect and Direction
.
2. Assign a unique analog join number.
Join Type Selection (Example: Input Selection, Pan Effect, Join Number 63
Assigned)
3. Select
the
Transition Duration
join and assign a unique analog join
number.
Operations Guide – DOC. 8170A
56
•
Digital Video Processor: CNX-DVP4
