Digital Video Processor
Crestron
CNX-DVP4
locate the SPZ file and click
Open
. This will display the program's header
information and enable one or both of the
What to Send
check boxes. If the
program does not contain any SIMPL+ modules only the
SIMPL Program
check box will be enabled. If it does contain SIMPL+ modules, then the
SIMPL
+
check box will also be enabled. Select one or both check boxes and
then click
Send Program
to begin the transfer.
NOTE:
You can also click
Check Program
to display the header information of the
currently loaded program.
3. Open Viewport and select
File Transfer |
Send Program
.
NOTE:
Unlike X-Series processors, the 2-Series processor does not require a
permanent memory image. Also, the 2-Series adds the ability to automatically
retrieve the currently compiled program from the control system. Simply verify that
the
Retrieve Current Program before overwriting
check box is selected.
“Send Program” Window
Advanced Console Commands
The SIMPL Windows online help file and the Crestron SIMPL Windows Manual
provide a full listing of console commands that are valid for
2-Series
control
systems. You can access the CNX-DVP4 console in a variety of ways: via a serial
connection (RS-232) with a PC, over Ethernet via the LAN port, or through Telnet. It
is also possible to issue console commands through logic, by adding a Console
symbol to the SIMPL Windows program.
The Console symbol is visible in the
Symbol Library
only when “Special” is selected
as the Symbol Set. Click:
Edit | Preferences
. In the
Symbol Set
area of the
General
tab, select
Special
as shown in the following graphic.
Operations Guide – DOC. 8170A
52
•
Digital Video Processor: CNX-DVP4
