Source and Numeric Keypads Crestron
CN-WP12F and CN-WP12N
4
••
Source and Numeric Keypads: CN-WP12F and CN-WP12N
Operations Guide - DOC. 5788A
2.
Grasp the lower-sides of the keypad and
gently
pull the bottom of the
keypad
outwards
as shown below.
Keypad Removal
CAUTION:
To avoid damage to the keypad shell during the next step, do not use
excessive force when prying the shell outwards.
NOTE:
The position of each switch cap is important to the CNX-PAD8 program.
Notice the location of each switch cap before disassembly.
3.
Using a small flat-tip screwdriver or your fingers, pry the sides of the
keypad shell
outwards
until the four retainer tabs (shown below)
recede from the sides of the shell. Separate the keypad shell from the
keypad PCB and base.
Rear View of Keypad
RETAINER
TABS
RETAINER
TABS
KEYPAD
SHELL
KEYPAD
PCB AND BASE
UPPER-TAB
