Crestron
CN-WP12F and CN-WP12N
Source and Numeric Keypads
Operations Guide - DOC. 5788A
Source and Numeric Keypads: CN-WP12F and CN-WP12N
••
9
Block Diagram of CN-WP12F SIMPL Program
Block Diagram of CN-WP12N SIMPL Program
How to Create the Program
Configuration Manager
Use the Configuration Manager workspace (
Project | Configure System
) in SIMPL
Windows to select and configure all the devices that need to be included into the
system. For this example, from the Control Systems folder in the
Device Library
select CNMSX-PRO. Drag and drop the CN-WP12F (Wired Panels folder in the
Device Library
) into
System View
. For this example, the NET ID of the CN-WP12F
is being set to 4C as shown on the next page. Drag and drop the CN-WP12N (Wired
Panels folder in the
Device Library
) also into
System View
and set the NET ID to 48.
NOTE:
SIMPL Windows v1.30.01 or later is required to program the control
system containing the CN-WP12F and CN-WP12N. If using an earlier version of
SIMPL Windows, Crestron recommends a SIMPL Windows and operating system
upgrade. The latest version can be obtained from the Downloads page of Crestron’s
website (
www.crestron.com)
. New users are required to register in order to obtain
access to the FTP site.
