Crestron C2N-MMS, Руководство по эксплуатации

Страница: 14 / 32

Professional Multimedia Switch Crestron C2N-MMS
The Crestron Toolbox provides several methods to easily set or change device Net
IDs for any device on the network. The following method permits you to change the
Net ID of any device in the network through the “Network Device Tree” window.
NOTE: This method prevents you from selecting an existing Net ID that is assigned
to a device that is not equipped with TSID.
This method permits you to manually set the Net ID for any device in the network,
set any known Net IDs that may require changing, and may also be used for non-
TSID equipment. This method will not permit you to choose an ID already in use by
another device that is not equipped with TSID. A warning message will appear if you
attempt to use an ID that is already in use by a device that is equipped with TSID.
Duplicate Net ID Warning Message
This method does not change the Net ID as assigned in SIMPL Windows. For
information on setting the Net ID in SIMPL Windows, refer to “Setting the Net ID in
Device Settings” on page 18.
NOTE: You may also use SystemBuilder™ to perform Network ID setup. Refer to
the respective help file for more information.
1. Ensure that all network devices are connected to the control system.
2. Open Crestron Toolbox and establish communications (refer to Establishing
Communications on page 19).
3. Select the Network Device Tree icon, or select Tools | Network
Device Tree .
4. Expand the device tree until the Net ID that is to be changed is visible.
Right-click on the Net ID, and when the sub-menu appears, select Change
Network ID .
“Network Device Tree” – Sub-Menu
10
•
Professional Multimedia Switch: C2N-MMS Operations Guide – DOC. 6374