Crestron C2N-MMS, Руководство по эксплуатации

Страница: 10 / 32

Professional Multimedia Switch Crestron C2N-MMS
C2N-MMS (Rear Panel)
Physical Views of the C2N-MMS (Top, Front, and Side)
16.92 in
(42.98 cm)
6.44 in
(16.35 cm)
7.15 in
(18.17 cm)
17.03 in
(43.25 cm)
1.70 in
(4.32 cm)
Ports
All connections to the C2N-MMS are made through the ports on the rear panel.
Refer to the illustrations and descriptions that follow.
NOTE: Interface connectors for the NET ports are provided with the C2N-MMS.
VIDEO IN and VIDEO OUT
Each video input and output features two BNC connectors. When switching an
S-video signal, the chrominance “C” and Luminance “COMP/Y” connectors should
be connected. When switching composite video, only the “COMP/Y” connector
should be connected.
RGBHV IN and RGBHV OUT
Each RGB input and output uses a standard HD15 connector for RGBHV signals.
Refer to the following table for pin assignments.
Each of the RGB inputs can be configured to optimize performance. For more
information, refer to refer to “Configuring the RGB Input Ports” on page 11.
6
•
Professional Multimedia Switch: C2N-MMS Operations Guide – DOC. 6374