Professional Multimedia Switch
Crestron
C2N-MMS
The PC communication settings specified here should match the protocol
that the control processor expects. The usual settings are as follows:
•
Port = COM 1 through COM 8. Select the correct COM port on
the PC.
•
Baud rate = Auto-detect.
•
Parity = None.
•
Number of data bits = 8.
•
Number of stop bits = 1.
•
Hardware handshaking (RTS/CTS) enabled.
•
Software handshaking (XON/XOFF) not enabled.
“Address Book” Window – Serial Setup
3. After setting the correct parameters, click
OK
to return to the Crestron
Toolbox main window.
4. Click
Tools | Network Device Tree
, or click the network device tree icon
to display the devices in the system. Select
Serial on COM1
from the
drop down list if it is not already selected. If communication is successful,
the network devices that are connected to the control system are displayed.
Network Device Tree
20
•
Professional Multimedia Switch: C2N-MMS
Operations Guide – DOC. 6374
Содержание C2N-MMS
Страница 1: ...Crestron C2N MMS Professional Multimedia Switch Operations Guide...
Страница 4: ......
