Crestron ATC-AUDIONET, Руководство по эксплуатации и установке

Страница: 17 / 48

Crestron ATC-AUDIONET Internet Radio Tuner Card
Uploading and Upgrading
Crestron recommends using the latest programming software and that each device
contains the latest firmware to take advantage of the most recently released features.
However, before attempting to upload or upgrade it is necessary to establish
communication. Once communication has been established, files (for example,
programs or firmware) can be transferred to the control system (and/or device).
Finally, program checks can be performed (such as changing the device ID or
creating an IP table) to ensure proper functioning.
Establishing Communication
Use Crestron Toolbox for communicating with the ATC-AUDIONET; refer to the
Crestron Toolbox help file for details. There is a single method of communication:
TCP/IP communication.
Ethernet Communication
PC Running
Crestron Toolbox
LAN ATC-AUDIONET
The ATC-AUDIONET connects to PC via Ethernet:
1. Enter the IP address, IP mask and default router of the ATC-AUDIONET
via Crestron Toolbox (
Functions | Ethernet Addressing ); otherwise enable
DHCP.
NOTE: Use the Device Discovery Tool in Crestron Toolbox to detect all
Ethernet devices on the network and their IP configuration. The tool is
available in Toolbox version 1.15.143 or later.
NOTE: When taken out of the box, the ATC-AUDIONET is configured
for DHCP operation. If a DHCP server is available and the
ATC-AUDIONET is connected to the network, the IP address can be
obtained from the host device’s setup screens. For instructions on using the
front panel controls of a host system, please refer to the latest version of the
respective Operations guide.
2. Confirm Ethernet connection between ATC-AUDIONET and PC. If
connecting through a hub or router, use CAT5 straight through cables with
8-pin RJ-45 connectors. Alternatively, use a CAT5 crossover cable to
connect the two
LAN ports directly without using a hub or router.
3. Use the Address Book in Crestron Toolbox to create an entry for the
ATC-AUDIONET with the ATC-AUDIONET’s TCP/IP communication
parameters.
4. Display the “System Info” window (click the
icon) and select the
ATC-AUDIONET entry.
Operations & Installation Guide – DOC. 6933A Internet Radio Tuner Card: ATC-AUDIONET
•
13